The Rear Ports - Billion BiPAC 7402G User Manual

The Rear Ports

Port
Power Switch
1
PWR
2
3 RESET
LAN
4 1X —
(RJ-45 connector)
CONSOLE
5
LINE
6
Chapter 2: Installing the router
6
5
Power ON/OFF switch
Connect the supplied power adapter to this jack.
To be sure the device is being turned on
1-3 seconds: quick reset the device.
6 seconds above, and power off, power on the device: restore to
factory default settings. (Cannot login to the router or forgot your
Username/Password. Press the button for more than 6 seconds).
Caution: After pressing the RESET button for more than 6 seconds, to be
sure you power cycle the device again
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four
LAN ports when connecting to a PC or an office/home network of
4X
10Mbps or 100Mbps.
Connect a PS2/RS-232 cable to this port when connecting to a PC's
RS-232 port (9-pin serial port).
Connect the supplied RJ-11 ("telephone") cable to this port when
connecting to the ADSL/telephone network.
802.11g ADSL2+ VPN Firewall Router
4
3
Meaning
press RESET button for:
.
1
2
9