Configuration; Lan (Local Area Network); Bridge Interface - Billion BiPAC 7402G User Manual

Configuration

When you click this item, you get following sub-items to configure the ADSL router.
LAN, WAN, System, Firewall, VPN, QoS, Virtual Server, Time Schedule and Advanced
These functions are described below in the following sections.

LAN (Local Area Network)

There are seven items within the LAN section:
Filter, Wireless, Wireless Security, Wireless Client Filter, Port Setting

Bridge Interface

You can setup member ports for each VLAN group under Bridge Interface section. From the example,
two VLAN groups need to be created.
Ethernet: P1 (Port 1)
Ethernet1: P2, P3 and P4 (Port 2, 3, 4) Please uncheck P2, P3, and P4 from Ethernet VLAN port first.
Note: You should setup each VLAN group with caution. Each Bridge Interface is arranged in this order.
Bridge Interface
Ethernet
Ethernet1
Ethernet2
Ethernet3
Management Interface: To specify which VLAN group has possibility to do device management, like
doing web management.
Note: NAT/NAPT can be applied to management interface only.
Chapter 4: Configuration
802.11g ADSL2+ VPN Firewall Router
Bridge Interface, Ethernet, IP Alias, Ethernet Client
VLAN Port (Always starts with)
P1 / P2 / P3 / P4
P2 / P3 / P4
P3 / P4
P4
and
DHCP Server.
31