Qos (Quality Of Service); Prioritization - Billion BiPAC 7402G User Manual

QoS (Quality of Service)

QoS function helps you to control your network traffic for each application from LAN (Ethernet and/or
Wireless) to WAN (Internet). It facilitates you to control the different quality and speed of through put for
each application when the system is running with full loading of upstream.
Here are the items within the QoS section:
(bandwidth management).

Prioritization

There are three priority settings to be provided in the Router:
High
Normal (The default is normal priority for all of traffic without setting)
Low
And the balances of utilization for each priority are High (60%), Normal (30%) and Low (10%).
Click Clear
Application: A user-define description to identify this new policy/application.
Time Schedule: Scheduling your prioritization policy.
Priority: The priority given to each policy/application. Its default setting is set to High; you may adjust
this setting to fit your policy/application.
Protocol: The name of supported protocol.
Source Port: The source port of packets to be monitored.
Chapter 4: Configuration
Prioritization
You can click Clear to delete the existing Application.
802.11g ADSL2+ VPN Firewall Router
and
Outbound / Inbound IP Throttling
112