Eaton ConnectUPS Web/SNMP Card Quick Start Instructions page 13

4. At the main menu, type 3 at the prompt and press Enter to restart the card
(see Figure 8).
Figure 8. Restart the Card
NOTE
5. From the main menu, type 1 and press Enter. The Web/SNMP Settings
menu displays.
6. Type 1 to see the current setting for the IP address and press Enter.
7 . The DHCP-assigned IP address displays. Make a note of this address.
8. Type 0 and press Enter to return to the main menu.
9. Verify network communication:
a.
b.
c.
Eaton ConnectUPS Web/SNMP Card Quick Start Instructions 164950185—Rev D 13
When the green UPS Data LED flashes regularly, the card has
been restarted and is operating normally.
Open a browser, enter the IP address in the Address bar, and click Go. If
the assigned IP address is working, you are prompted to log on.
Log on as administrator. The default user name and default password
are "admin. "
When the ConnectUPS Web/SNMP card Web page displays, you know
that the card is communicating with the network.