Instructions On Correct Machine Use - Kunzle & Tasin Bona Scorpion DCS Operating Manual

Table of Contents

Advertisement

Prevention Measures for Users (Cont.)
Compliance with safety measures and warnings (cont.)

Instructions on Correct Machine Use

Read this manual carefully and become familiar with the machine.
The equipment is suitable for industrial use (e.g. in hotels, schools, hospitals, offices, factories and shops).
The following information highlights particularly hazardous situations for the operator and/or machine. Understand when these conditions may be
present. Removing safety features could cause death or physical injury. Take all steps necessary to instruct personnel who may use the machine.
Report any damage on the machine or incorrect operation immediately.
1)
Keep hands and clothes away from rotating parts.
2)
Keep hands on the handle when the motor is operating.
3)
DO NOT leave the machine unattended when the motor is operating.
4)
Always use the machine with the dust bag in the correct position.
5)
DO NOT detach the dust bag when the motor is operating.
6)
Always disconnect the power supply cable from the machine before performing maintenance.
7)
Transport the machine with care due to the heavy weight of the individual parts making up the machine.
8)
Always use the machine in well-ventilated areas.
9)
Always keep the work area well-lit.
10)
Always dispose of the sawdust appropriately.
11)
Use the type and amount of abrasive specified in the instruction manual.
12)
The use of accessories other than those recommended in this manual may cause injury.
13)
The machine is for indoor use only.
Failure to comply with instructions on this machine and in this manual may cause serious injury and/
or damage. Read and comply with all safety instructions. Ensure that all plates, labels, warnings and
instructions are secured to the machine. New plates can be obtained from an authorized Bona dealer.
Injury or damage may occur if maintenance operations or repairs are carried out by any unauthorized
personnel.
The machine may become damaged if it is not kept in a dry building. Keep in a dry building.
17

Advertisement

Table of Contents
loading

Table of Contents