Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Kunzle & Tasin NEW GOLIA PLUS
Summary of Contents for Kunzle & Tasin NEW GOLIA PLUS
- Page 1 SINGLE DISC MACHINE NEW GOLIA PLUS USER & MAINTENANCE MANUAL ...
- Page 2 NEW GOLIA PLUS User Manual_ May 2013 Edition Foreword This manual contains important information on the safe use and operation of this machine. Failure to read this manual before operating, adjusting or servicing this machine could cause injury or damage to persons or objects.
-
Page 3: Table Of Contents
NEW GOLIA PLUS User Manual_ May 2013 Edition Contents Key for machine symbols Operator safety instructions Storage Introduction Machine data plate Transporting and handling the machine Transport with one person Transport with two people Commencing operation Correct use Instructions for assembly following transportation... -
Page 4: Key For Machine Symbols
CAUTION notices on the machine or in this manual. HAZARD: Failure to read the NEW GOLIA PLUS machine manual before operating, adjusting or performing maintenance operations on the machine could cause injury or damage to persons or objects. Anyone operating the machine should understand how to use and operate it before starting it up. -
Page 5: Storage
NEW GOLIA PLUS User Manual_ May 2013 Edition Storage It is advisable to store the machine in its original packaging. If the machine is removed from the original packaging and is not used for some time ensure the wheels and disc are not in contact with the ground. -
Page 6: Transporting And Handling The Machine
NEW GOLIA PLUS User Manual_ May 2013 Edition Transporting and handling the machine WARNING Due to the weight of the machine the handle and any accessories should be removed before it is transported. Request assistance to lift the machine. -
Page 7: Commencing Operation
NEW GOLIA PLUS User Manual_ May 2013 Edition Commencing operation Correct use Keep hands and clothing away from moving mechanical parts. The work area is protected with the base frame. Instructions for assembly following transportation To assemble the machine following transportation proceed as follows: 1. -
Page 8: Cables, Extensions And Plugs
NEW GOLIA PLUS User Manual_ May 2013 Edition Commencing operation Cables, extensions and plugs Only use approved cables. The maximum recommended cable length is 10m; for greater lengths use cables with a larger cross-section. Using the machine with unsuitable cable cross-sections and/or excessively long cables CAUTION may cause injury or damage to people or objects. -
Page 9: Recommendations On Prevention Measures For Users
NEW GOLIA PLUS User Manual_ May 2013 Edition Recommendations on prevention measures for users Personal safety measures WARNING Sawdust can spread through the air and be inhaled when using the sander. Always wear a dust mask when using the sanding equipment. -
Page 10: Instructions On Correct Machine Use
NEW GOLIA PLUS User Manual_ May 2013 Edition Recommendations on prevention measures for users Compliance with safety measures and warnings HAZARD The use of this machine with a damaged power supply cable may cause electric shock. Do not use the machine if the power supply cable is damaged. Do not use the electric cable to move the machine. -
Page 11: Machine Specifications
NEW GOLIA PLUS User Manual_ May 2013 Edition Machine specifications MODEL Drive disc dimension: Ø 410mm Ø 410mm Ø 410mm Brush dimension: Ø 410mm Ø 410mm Ø 410mm Rotation speed: 150rpm 150rpm 250rpm Europe Europe Europe Motor: A81B A81B... -
Page 12: Machine Warnings
EW GOLIA A PLUS Us ser Manua May 2013 E Edition achine war rnings ohibited use WARNING This equipme ent is not to be used by anyone (chil ldren include ed) with phys sical or ment tal disabilities s, or anyone without the relevant ex xperience an... -
Page 13: Preparing To Start The Machine
NEW GOLIA PLUS User Manual_ May 2013 Edition Preparing to start the machine WARNING Only use accessory and abrasive discs recommended by the sander manufacturer, and which are suitable for the required sanding procedure. 6. Bring the machine back to the vertical position by resting the accessory disc on the surface to be sanded. -
Page 14: Tilt Enable Microswitch
NEW GOLIA PLUS User Manual_ May 2013 Edition Tilt enable microswitch There is a tilt enable microswitch on the end of the handle which enables the machine to be started only when the handle is tilted for the start-up phase (in accordance with instructions on pg. -
Page 15: Machine Adjustment Procedures
NEW GOLIA PLUS User Manual_ May 2013 Edition Machine adjustment procedures Centring the accessory disc If fitted correctly (as outlined in number 5 on page 12), once the motor is running the accessory disc is centred and locks automatically on the machine. -
Page 16: Emergency Situations (For The User)
NEW GOLIA PLUS User Manual_ May 2013 Edition Emergency situations (for the user) FAULTS CAUSES SOLUTIONS Insufficient cutting Unsuitable or worn abrasive Replace the abrasive Insufficient tension due to: Insufficient motor speed Excessive cable length or unsuitable Use cables of suitable length and... -
Page 17: Declaration Of Conformity
NEW GOLIA PLUS User Manual_ May 2013 Edition DECLARATION OF CONFORMITY DECLARATION OF CONFORMITY 95/2006 EC, 42/2006 EC 108/2004 EC, 95/2002 EC 96/2002 EC KUNZLE & TASIN S.r.l. Manufacturer and entity authorised to compile and maintain the technical file Registered headquarters Business Management and Production Site Via Circonvallazione Est. -
Page 18: Disposal
EW GOLIA A PLUS Us ser Manua May 2013 E Edition sposal maltimento d di apparecchi iature da rott tamare da pa arte di privati nell’Unione Europea. Qu uesto simbolo ppare sul prod dotto o sulla confezione in ndica che il p prodotto non d deve essere s smaltito assie... -
Page 19: Notes
NEW GOLIA PLUS User Manual_ May 2013 Edition Notes _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________ _____________________________________________________________________________________... - Page 20 May 2013 Edition ...