Instruction On Correct Machine Use; Machine Specifications - Kunzle & Tasin STORNELLO 7699950001 Operating Manual And Safety Instructions

Precision vertical sander
Table of Contents

Advertisement

Operation manual STORNELLO
Prevention measures for users
Instructions on correct machine use
Read this manual carefully and become familiar with the machine. The equipment is suitable for commercial
use, for example in hotels, schools, hospitals, offices, factories and shops.
The following information highlights particularly hazardous situations for the operator and/or to the
machine. Understand when these conditions may be present. Removing safety features could causes death
or physical injury. Take all steps necessary to instruct personnel who may use the machine.
Report any damage on the machine or incorrect operation immediately.
1. Keep hands and clothes away from rotating parts.
2. Keep hands on the handle when the motor is operating.
3. Do not leave the machine unattended when the motor is operating.
4. Always use the machine with the dust bag in the correct position.
5. Do not detach the dust bag when the motor is operating.
6. Always disconnect the power supply cable from the machine before performing maintenance.
7. Always use the machine in well-ventilated areas.
8. Always dispose of the sawdust appropriately.
9. Use the type and amount of abrasive specified in the instruction manual.
10. Always keep the work area well-lit.
11. The use of accessories other than those recommended in this manual may cause injury.
12. Always use the sander machine inside buildings. Do not use outside buildings in the presence of water and
rain.

Machine specifications

Abrasive disc size: ø150 mm attached on backing pad by Velcro system
Plate size: ø148 mm
Sanding disc speed: n°7 speed (from 1500 rpm to 3200 rpm)
Motor: 230 V / 50 Hz
Motor power: 1010 W
Wheels: n°3 removable and replaceable spherical wheels
Pressure / plate inclination adjustment: by handwheel that operate on the height
adjustment of the rear wheel
Motor protection: IP 20
Noise Level: ≤ 92dB (A)
Vibration: ≤ 4m/s
Dimensions: 30x30x30 cm
Net weight: 4 kg (body complete machine)
Packaging: box / trolley
Gross weight: 12 kg (including box or trolley complete with accessories)
Standard equipment: protections, complete tool bag, trolley complete and standard plate.
Other equipment according to the purchased version.
®
2
15

Advertisement

Table of Contents
loading

Table of Contents