Main Entry - Korenix JetWave 2111 Series User Manual

4.9 Main Entry

The main entry provides the system tools, for example Save the configuration, Logout and Reboot
the system.
4.9.1 Save
Use this page to save configuration to flash. Every time while you finished the configuring the
device, please remember to save the configuration to flash. Otherwise, the configuration will lost
after reboot the system.
Press "Save to Flash" to save the configuration to flash.
4.9.2 Logout
After finished configuring and leave, please remember to Logout the system. Without Logout the
system, the login session will not timeout for couple minutes, it is a risk that other user may login
your system without password checking before timeout. Another affect is that the user can NOT
access at the same time if someone already login the system.
Use this page to logout. Press "Yes" to logout.
4.9.3 Reboot
Use this page to reboot the system. Press "Yes" to reboot system.
The below warming message will appear after you reboot the system.
JetWave 2111/2411 Series User Manual
Page 69