Management - Korenix JetWave 2111 Series User Manual

Left - IP of network interface : Left corresponds to right in IPsec point-to-point connection. The
left and right IP settings should be the same in both IPSec endpoints. Enter interface IP address
of left endpoint that can directly connected to right endpoint, for example, WAN port IP address in
router mode or cellular IP address when using cellular network.
Left Source IP Address: as Left - IP of network interface, enter the LAN port interface IP address
of left endpoint.
Left Subnet (network/netmask) : enter subnet mask of left endpoint in CIDR notation, for
example, 192.168.10.0/24.
Left RSA key : the attribute is only required when using RSA key authentication method. Using
public key generated from top-half page.
Right - IP of network interface : Right corresponds to left in IPsec point-to-point connection. The
left and right IP settings should be the same in both IPSec endpoints. Enter interface IP address
of right endpoint that can directly connected to left endpoint, for example, WAN port IP address in
router mode or cellular IP address when using cellular network.
Right Source IP Address: as Right - IP of network interface, enter the LAN port interface IP
address of right endpoint.
Right Subnet (network/netmask) : enter subnet mask of right endpoint in CIDR notation, for
example, 192.168.20.0/24.
Right RSA key : the attribute is only required when using RSA key authentication method. Using
public key generated from top-half page.
Check VPN-> status Web configuration page after enabled to see the status of IPSec connection.

4.7 Management

The "Management" feature set pages allow users to configure the remote settings, event warming
type, SNMP, SMTP, password and firmware update, configuration file, certification file upload.
4.7.1 Remote Setting
JetWave 2111/2411 Series User Manual
Page 56