4.2
System
For users who use the JetWave 2111/2411 series for the first time, it is recommended that you
begin configuration from the "System" feature set pages shown below:
In System pages, there are some configuration pages for the system settings. These setups are
introduced in below pages.
4.2.1 Basic Settings
Use this page to configure the basic parameters of the device.
Device Name: User could give a name for identifying a particular access point here. It allows
maximum 15 characters and no spaces.
Port 1 Data Rate: Configure the Speed/Duplex of the port Eth 1. The default value, Auto
means Auto-Negotiation. Force speed/duplex is available to setup here
JetWave 2111/2411 Series User Manual
Page 30