Tools - Korenix JetWave 2111 Series User Manual

4.8 Tools

The "Tools" feature set pages provides some additional useful tools. The System Log help you
see the occurred event logs, Ping Watchdog, Data Rate Test, Antenna Alignment and Ping tool.
4.8.1 System Log
Use this pages to set remote log server and show the system log.
Select "Enable Remote Syslog Server", type the IP Address and Port number of your syslog
server. The default port number is 514.
Press "Apply" to activate the setting.
In the lower screen, it displays the occurred system logs. Each entry has the index, occurred time,
source MAC address and the message. You can monitor the system by this screen, however, the
logs will be removed after system reboot.
Press "Clear" allows you to remove all of entries.
Press "Refresh" allows you to refresh the table.
JetWave 2111/2411 Series User Manual
Page 63