Stanford Research Systems SIM984 Operation And Service Manual page 25

2.4 Commands
LCME?
Example:
PARI(?) {z}
Example:
TOKN(?) {z}
Example:
SIM984 Isolation Amplifier
Command Error
Query the last command error code. A query of LCME? always clears
the error code, so a subsequent LCME? will return 0. Valid codes are:
Value Definition
No execution error since last LCME?
0
1 Illegal command
2 Undefined command
3 Illegal query
4 Illegal set
5 Missing parameter(s)
6 Extra parameter(s)
7 Null parameter(s)
8 Parameter buffer overflow
9 Bad floating-point
10 Bad integer
11 Bad integer token
12 Bad token value
13 Bad hex block
14 Unknown token
*IDN
LCME?
4
The error (4, "Illegal set") is due to the missing "?".
Parity
Set (query) parity {to z = (NONE 0, ODD 1, EVEN 2, MARK 3, SPACE 4)}.
After power-on, modules default to PARI NONE.
PARI EVEN
Token Mode
Set (query) the Token Query mode {to z=(OFF 0, ON 1)}.
If TOKN ON is set, then queries to the SIM module that return to-
kens will return the text keyword; otherwise they return the decimal
integer value.
Thus, the only possible responses to the TOKN? query are ON and 0.
On reset, TOKN is set to OFF.
TOKN OFF
2 – 11