Table of Contents
Advertisement
gACC-499E/U Communication unit
gACC-499E_U_Manual_EN.doc
7.
Wait until LEDs go out and then immediately remove the config cable.
8.
Wait unitl the READY, GSM and CONNECTED LED are on again.
9.
After a few minutes the device will turn off again. This is dependent of the call windows. If
there is an active call window open this may take longer.
10.
Remember to switch DIP-switch 3 to OFF.
GA-02.035-EN-30.05.17
Page 39 of 46
Advertisement
Table of Contents
