Table of Contents
Advertisement
gACC-499E/U Communication unit
gACC-499E_U_Manual_EN.doc
2.12
Configuration read-out
Reading out the configuration and configuration file can be performed by using a config cable or through a
modem connection. In case a password is required for reading out the configuration and configuration file
this can be entered at the "Password" field (below the "Baud rate" field). The activation of the password is
arranged in the configuration file. During read-out the user will be prompted whether to save the
configuration file or not.
At the end of the read-out the below dialog appears.
This dialog shows:
a.
The field strength in dB
b.
Software version and compilation date
c.
Device time (current time)
d.
TC65 version number
e.
The setting of the DIP-switches (x = not linked to CPU; 0 = OFF and 1= ON)
f.
IMEI number of the TC65 (This number can be copied to the clipboard for further processing.
This can be used to find the modem serial number in the list.)
GA-02.035-EN-30.05.17
Page 15 of 46
Advertisement
Table of Contents
