Removing the transport brace
Procedure of removing transport brace
Th e transport brace is mounted externally on AeroMaster XP
10, 13, and 17 units, on the side panels of a length of 1250
mm and more, for AeroMaster XP units 22 and 28, then all
the side panels of size 1000 mm or more.
Figure 1 – Overall view of mountet transport brace
Step 1: Remove the screws and washers
Figure 2 – deassembly of screws and washers
Step2: Remove the brace. Cover the rivet nuts with nut caps.
cover the remaining holes on the side panel with a nylon
holster. Nut caps with nylon holster can be found in a bag
attached to the brace.
Figure 3 – removing the brace
40