Stacks Of Aeromaster Xp Air Handling Unit Sections - Remak AERO MASTER XP Series Installation And Operating Instructions Manual

Stacks of AeroMaster XP Air Handling Unit Sections

Recommended unloading procedure of stacks of AeroMaster XP air handling unit sections from
a truck and their dismantling
Stacks of XP sections can be unloaded from a truck using a forklift truck and placed on a flat floor. Then remove the protecting foil, fastening strips
and cardboard, and follow the instructions below.
Upper section unloading
1.a) A section without a base frame placed on the lower section without the pallet
Using the forklift truck, lift the empty pallet with cardboard up the level of the bottom edge of the upper section, and push it against the lower
section side, see figure # 1. Then shift the upper section onto the pallet ready, see figure # 2 and 3. The pallet must be of the same or larger size
than the platform of the unloaded section. For XP04 and XP06 sections up to 1.2 m long, use a 0.8 × 1.2 m pallet.
On customer request, we can deliver suitable pallets for section platforms larger than 0.8 × 1.2 m, or the customer can make his own pallets of
suitable dimensions himself.
Figure. 1
The pallet ready for shifting the upper
section onto it
1.b) A section without a base frame placed on the lower section with the pallet
This section placed on the special pallet can be unloaded using a forklift truck. Before unloading the upper section, it is necessary to unscrew the
wood screws and remove the side boards.
Figure. 4
2. Sections equipped with a base frame
The sections with a base frame are stacked using an interspacing frame. Before unloading the upper section, it is necessary to unscrew the wood
screws, remove the side boards and unscrew the screws in the base frame. The openings in the base frame are suitable for forklift truck forks.
Insert the forks into these openings and unload the section.
Figure. 6
38
Figure. 2
Shifting the upper section
onto the pallet
Figure. 5
remove side
boards
Figure. 7
Openings to insert
lifting
Remove side
boards
Figure. 3
The upper section placed on the pallet
space to insert
lifting forks
Unscrew the
screws fixing the
base frame to the
balks