Compact version of Air-Handling Units
Connection of Blocks
Th e block connection is performed according to the fi gure below. When connecting the blocks follow the chapter "Connection of the Unit's Sec-
tions (see page 7, pictures 9 a 10).
Figure 1 – inner block connection detail
Connection of the fi ltration chamber
Upper connection of blocks
Filter Replacement
Filter inserts are inserted into the guiding rails. When replacing the fi lter inserts, make sure they are properly and fully inserted.
Figure 2 – Replacement of fi lter inserts
Filter size
XP 04
XP 04
XP 06
XP 10
* Th e F7 fi ltration class fi ltration insert can only be used for XPHOC internal assembly.
** Th e required fi ltration class must be specifi ed aft er the mark xx
46
Central connection of blocks
Lower connection of blocks
D I M E NSI O NS A N D N U M B E RS O F F I LT E R I NSE R T S
Filtration class
Filter dimensions
G4, F5
544 x 247 x 98
F7 *
544 x 492 x 98
G4, F5, F7 *
347 x 642 x 98
G4, F5, F7 *
427 x 399 x 98
Connection of base frames
Figure 3 – Replacement of fi lter inserts
Numbers of fi ltration inserts
2
1
2
4
Kit designation
XPNMC 04xx **
XPNMC 0407
XPNMC 06xx
XPNMC 10xx