Running The Options Dump Report; Running The Department Confirmation Report - Royal Alpha5000ML Instruction Manual

Running the Options Dump Report

Running the Department Confirmation Report

Alpha5000ML owner's manual
You can print the Parameters Print report to check your programming results. For
more information about programming the cash register, see Chapter5 Setting up Your
Cash Register Parameters on page38.
The parameters Print report includes:
All parameters settings

Department parameters

PLU parameters

Clerk parameters

Tax parameters

System Configuration

Receipt parameters

To run a program confirmation report
X Report  Parameters Print
1 Switch the control lock to X mode.
2 If you are prompted for a Manager Password, type the password number and then
press enter key. If you did not program a Manager Password, go to the next
step.
3 Press the Arrow Down key to select Parameters Print. Press the enter key.
4 Press the enter key. The all parameters report prints.
5 Press the Arrow Down key to select Single. Press the enter key.
6 Select the parameter you want, Press the enter key. The all parameters report
prints.
You can print a report that shows the active information for all programmed
departments.
To run a department confirmation report
X Report  Parameters Print  single Dept
1 Switch the control lock to X mode.
2 If you are prompted for a Manager Password, type the password number and then
press enter key. If you did not program a Manager Password, go to the next
step.
3 Press the Arrow Down key to select Parameters Print. Press the enter key.
4 Press the Arrow Down key to select single. Press the enter key.
5 Select Dept, Press the enter key. The all programmed departments' parameters
prints.
62