Pw Report And. Weekly/Monthly Report - Royal 482NT Operating Manual

(Continued)
XjZ MANAGEMENT REPORTS
TO T AKE A PLU REPOijT
I I
·X· or
az:
+
(PLU)
II
1. Tum the key to the
ax"
or
'X
position as desired.
2. If an
ax" or a PRG/Z Manager Password has been programmed, TYPE the (PASSWORD #),
then PRESS the (CHECK) Key, or if you did NOT program an -X" or a PRG/Z Manager
Password, go to Step 3.
3. PRESS the (PLU) Key.
Important: A PLU Reading must be closed out in the
-z:
position.
01-24-94
'1234
X
-x-
PLU READING (If
a HZ·
PUl Reading
was taken, the letter
aza
will print)
PUl ,
00'1
001
ACTIVITY OJUNTER (II of PUl
;telllS
t:118t: were rung up)
'1·00 SALES TOTAL IN PUl
n .
002
002
2·00
003
00'1
5·00
8'00 TL
SALEs
TOTAL OF ALL
PLUs
12·03 001
TO T AKE A (WEEKLY OR MONTHLy) PLU REPORT
1.
Turn the key to the "X· or
-z:
position as desired.
2. If an "X' or a PRGjZ Manager Password has been programmed, TYPE the (PASSWORD #),
then PRESS the (CHECK) Key, or if you did NOT program an ·X" or a PRGjZ Manager
Password, go to Step 3.
3. TYPE (99), then PRESS the (PLU) Key.
Note: The printout of the weekly or monthly PLU Report will be identical to . . t hat of the. PLU Report illustrated
above, except the PLU Reading symbol will be "99X" instead of -X".
TO TAKE A SELECTIVE PLU REPORT
(STARTING PLU #) + (OTY /TIME) + (ENDING PLU #) + (PLU)
3 digits (Maximum). 3 digits (Maximum)
Example: Print a PLU Report for PLU #1-50:
1. Turn the key to the ax" position.
2. TYPE (1), PRESS the (QTY{TlME) Key, TYPE (50), then PRESS the (PLU) Key.
3. The report will print.
66