Programming Plus With The Optional Barcode Reader - Royal Alpha5000ML Instruction Manual

Programming PLUs with the Optional Barcode Reader

Alpha5000ML owner's manual
To program PLUs without a barcode reader
PRG PLU SETTING
1 Switch the control lock to PRG.
2 If you are prompted for a Manager Password, type the password number and then
press the enter key. If you did not program a Manager Password, go to the next
step.
3 Press the Arrow Down key to select PLU SETTING. Press the enter key.
4 Press the Arrow Down key to select Add New PLU. Press the enter key.
5 Using the Number keys, enter the PLU number. Press the enter key.
6 Follow the instructions on the display
7 To program the next PLU, press subtotal to barcode input and press the enter
key.
You can use the optional Royal model PS700 barcode reader to scan items and
automatically ring them up. Barcode readers save time and reduce errors. The
barcode reader must be held about ½ inch or closer above the symbol on the product
to read the UPC or other barcode properly.
Important
If you enter the wrong character, press the bksp key to clear the character.
Now you can continue.
To program PLUs using the barcode reader
PRG  PLU SETTING
1 Switch the control lock to PRG.
2 If you are prompted for a Manager Password, type the password number and
then press the enter key. If you did not program a Manager Password, go to
the next step.
3 Press the Arrow Down key to select PLU SETTING. Press the enter key.
4 Press the Arrow Down key to select Add New PLU. Press the enter key.
5 Using the barcode reader, scan the barcode. Hold the barcode reader less than
½ inch from the barcode you want to scan. Press the button on the bottom of
the reader. Flick the reader slightly to move the LED light along the barcode to
read it. The barcode reader beeps when it properly reads the barcode. Follow
the instructions on the display.
6 To program the next PLU, press subtotal to barcode input and press the enter
key.
36