Blank Templates For Model Design - AT&T Callmaster Series Reference Manual

Blank Templates for Model Design

The Software Associate can use the following blank templates to create models for administering
groups of terminals at a customer site.
Use the following procedures for filling out these forms.
1. In each button space write the telephone number, extension, feature code, or feature to
be administered on that button. Note that some of the voice terminals have double-level
buttons on which you can designate 2 features.
2. If the model design is to be used on other voice terminals, write the Model Name at the
top of the form beside Model Name.
3. Fill in your name by Software Associate.
4. Write the numbers and letters of the project code beside Project Code.
5. When the customer has approved the button assignments designated on the templates,
have the customer sign the form beside Customer Approval.
6. Beside Date, write the date that the customer signed the form.
The following voice terminal templates are available for your use:
7402 Plus
7406D
7406 BIS
7406 Plus
7407D
Enhanced 7407D
7407 Plus
7410D
7410 Plus
7434D
7444
8403
8410D
8434
602 CALLMASTER
CALLMASTER II and III (603)
ISDN 7505
ISDN 7506
Blank Templates for Model Design
7-1