8110 and 8110M Telephones
Features
Fixed Feature Buttons
The 8110 and 8110M telephones have the following fixed feature buttons:
FLASH button
For using features such as Transfer or Conference with business communications sys-
tems, and for custom calling features if the user is using the telephone at home.
REDIAL button
Can be used for redialing the last number dialed from the dial pad, either an extension or
an outside number. The number redialed can be up to 20 digits.
With the (Redial) Auto-Pause feature, the telephones can be programmed to insert
pauses after a dial access code (such as 9) in a redialed number. If the user usually
waits a short period to obtain a second dial tone after dialing an access code, this waiting
time can be set by programming the automatic pause between the system access code
and the telephone number. The (Redial) Auto-Pause feature will help eliminate misdial-
ing.
HOLD button
Used for putting a call on hold. If users want to put a call on hold and place another call,
they must access the system Hold feature by using the Flash button.
Speakerphone button (labeled SPKR)
Used for 2-way conversation with another party without lifting the handset.
Speaker volume is controlled by using the Speaker volume control switch on the right
side of the telephone.
MUTE button
Used for turning off the microphone of the built-in speakerphone or the handset.
Auto Answer button (labeled AUTO)
Used for enabling calls to be automatically answered a call without lifting the handset.
For those who require speakerphone functionality without use of the Auto-Answer
feature, the Auto-Answer button can be removed and replaced with a flat cap cover
shipped with each 8110 and 8110M telephone.
3-370