Replacing The Lens - OPGAL EyeCGas 2.0 User Manual

80.
Operation | Replacing the Lens

Replacing the Lens

Lens replacement should be done in a clean area. Ensure the lens stays
free from dust or dirt particles (see
particles do not enter the camera when replacing the lens.
To replace the camera lens:
1. Power off the camera.
2. Press the quick release latch (A) towards the camera body.
3. While holding the latch (A), rotate the lens counter-clockwise to its
releasing position (B).
4. Remove the lens from the camera (C) and cover both sides of the
lens with the protective cap.
5. Connect the replacement lens to the camera and rotate it clockwise
until it clicks in place.
MENU
SAFETY OVERVIEW
CAUTION
Cleaning the Lens), and that dust or dirt
OPERATION TECHNICAL
SPECIFICATIONS
B
A
MAINTENANCE TROUBLESHOOTING

www.
C
TECHNICAL
SUPPORT
EyeCGas® 2.0 | User Manual Rev 01 | Doc P/N: UM-8G9A0000B