Charging The Battery - OPGAL EyeCGas 2.0 User Manual

20.
Operation | Preparation for Use

CHARGING THE BATTERY

To charge a battery:
1. Plug the battery charger into a power outlet.
2. Remove the adhesive tape from battery contacts.
3. Insert the battery into the charger until it latches.
LEDs on the battery charger indicates the following:
Red - charging
z
Green - fully charged
z
Flashing red - error (e.g., incorrect placement on the charger or an
z
improperly functioning battery)
▪ Verify correct orientation when inserting the battery into the charger.
▪ Fully charge a battery prior to use.
▪ A fully depleted battery takes about 7 hours to charge.
▪ For battery warnings and cautions, see
MENU
SAFETY OVERVIEW
NOTES
Battery Warnings and Cautions.
OPERATION TECHNICAL
SPECIFICATIONS
MAINTENANCE TROUBLESHOOTING

www.
TECHNICAL
SUPPORT
EyeCGas® 2.0 | User Manual Rev 01 | Doc P/N: UM-8G9A0000B