OPGAL EyeCGas 2.0 User Manual page 65

65.
Operation | Camera Settings
Connecting via USB
USB connectivity allows for networking communication and file transfer.
To connect to a computer or tablet via USB:
1. Display the menu.
2. Navigate to the connectivity tab.
3. Scroll to and select USB.
4. Select one of the following options:
Mass Storage – enables transferring files between the camera
»
and computer/tablet, as well as upgrading the camera software.
Net Adapter – enables network communication between
»
EyeCGas® 2.0 and a computer or tablet using the USB cable.
5. Remove the cap from the camera's USB connector (A) and connect the
USB cable between the camera and a computer or tablet.
▪ The camera keypad is disabled when mass storage option is selected.
▪ Set the computer firewall to allow communication with EyeCGas® 2.0.
▪ Consult with your network administrator regarding specific
communication settings.
MENU
SAFETY OVERVIEW
NOTES
OPERATION TECHNICAL
SPECIFICATIONS
Bluetooth
Bluetooth
Setup
GPS
USB
Video
Streaming
A
MAINTENANCE TROUBLESHOOTING

www.
Mass Storage Click the right
navigation button
Net Adapter
to make selection.
TECHNICAL
SUPPORT
EyeCGas® 2.0 | User Manual Rev 01 | Doc P/N: UM-8G9A0000B