Powering Off Camera; Replacing The Battery - OPGAL EyeCGas 2.0 User Manual

79.
Operation | Powering Off Camera

Powering Off Camera

To power off the camera, press the power button (A) for 3 seconds.
The USB cable must be unplugged in order for the camera to power off.

Replacing the Battery

To replace the battery:
1. Power off the camera.
2. Pull the battery latch out slightly (A).
3. Remove the battery from the camera (B).
4. Insert a fully-charged battery (see
MENU
SAFETY OVERVIEW
NOTE
Attaching the Battery).
OPERATION TECHNICAL
SPECIFICATIONS
press for
A
3 seconds
MAINTENANCE TROUBLESHOOTING

www.
Keypad
A
B
TECHNICAL
SUPPORT
EyeCGas® 2.0 | User Manual Rev 01 | Doc P/N: UM-8G9A0000B