OPGAL EyeCGas 2.0 User Manual page 26

26.
Operation | Camera Startup
REMOVING LENS COVER
Remove the lens cover once the power-up sequence has completed.
To remove the lens cover:
1. Verify the lens cover is tied to the side of the camera (A).
2. Push in both latches on either side of the cover (B).
3. Remove the lens cover.
To prevent the lens from being scratched, always mount the lens cover
over the lens when the camera is not in use.
MENU
SAFETY OVERVIEW
CAUTION
OPERATION TECHNICAL
SPECIFICATIONS
B
A
MAINTENANCE TROUBLESHOOTING

www.
TECHNICAL
SUPPORT
EyeCGas® 2.0 | User Manual Rev 01 | Doc P/N: UM-8G9A0000B