OPGAL EyeCGas 2.0 User Manual page 45

45.
Operation | Frequently Used Operations
CHOOSING EMISSIVITY VALUE
Emissivity value is chosen according to the physical characteristic of the
material being reviewed.
To choose emissivity value:
1. Select thermography viewing mode (see
Viewing Modes).
2. Consult the emissivity table and choose the relevant value.
3. Press the emissivity button (A) to select the desired value.
Each button press changes emissivity value by .05, advancing from
.1 to 1 in a cyclic manner. The current value is indicated on the
display (B).
▪ Emissivity value selection functions in
▪ Emissivity value can also be set using the menu system (see
Thermography Mode Settings).
MENU
SAFETY OVERVIEW
Switching Between
NOTES
thermography viewing mode only.
Defining
OPERATION TECHNICAL
SPECIFICATIONS
Keypad
A
B
MAINTENANCE TROUBLESHOOTING

www.
Emissivity Values of
Common Materials
TECHNICAL
SUPPORT
EyeCGas® 2.0 | User Manual Rev 01 | Doc P/N: UM-8G9A0000B