Power-Up Sequence - OPGAL EyeCGas 2.0 User Manual

25.
Operation | Camera Startup

POWER-UP SEQUENCE

The camera goes through the following power-up sequence:
1. A black screen, followed by the Opgal logo, are displayed for
approximately ten seconds.
2. The cooler starts.
3. The camera starts in visible
4. The cooler icon (A) blinks for 8-10 minutes, indicating the camera is
in cool down state.
5. The camera performs an automatic NUC when cool down is
complete (see Performing Non-Uniformity Correction
6. Once cool down is complete, all viewing modes become available
and cooler icon (A) disappears.
▪ The cool down process allows the infrared detector to reach operating
cryogenic temperature. Once this temperature is achieved, the cooler
icon disappears, indicating cool down is complete.
▪ During the cool down process the camera menu is available (see
Settings).
MENU
SAFETY OVERVIEW
mode.
(NUC)).
NOTES
Camera
OPERATION TECHNICAL
SPECIFICATIONS
Replace this image
MAINTENANCE TROUBLESHOOTING

www.
TECHNICAL
SUPPORT
EyeCGas® 2.0 | User Manual Rev 01 | Doc P/N: UM-8G9A0000B
A