OPGAL EyeCGas 2.0 User Manual page 62

62.
Operation | Camera Settings
Connecting via Wi-Fi
This section reviews the tasks associated with connecting a peripheral
device to EyeCGas® 2.0 using Wi-Fi communication.
To enable Wi-Fi connection:
1. Display the menu.
2. Navigate to the connectivity tab.
3. Scroll to and select Wi-Fi.
4. Select one of the following options:
Hot Spot – the camera serves as a Wi-Fi hot spot, enabling a
»
mobile device to connect to it.
Off – turns Wi-Fi off.
»
5. Locate the SSID (A) and password (B) in the
screen. Use these parameters to connect the peripheral device to
the camera's Wi-Fi hotspot.
▪ Consult with your network administrator regarding specific communication
settings.
▪ Set the computer firewall to allow communication with EyeCGas® 2.0.
MENU
SAFETY OVERVIEW
system information
NOTES
OPERATION TECHNICAL
SPECIFICATIONS
Wi-Fi Hot Spot
Off
Bluetooth
Bluetooth
Setup
GPS
USB
A
B
MAINTENANCE TROUBLESHOOTING

www.
Click the right
navigation button
to make selection.
Hot Spot
TECHNICAL
SUPPORT
EyeCGas® 2.0 | User Manual Rev 01 | Doc P/N: UM-8G9A0000B