Driftwood Log Set Installation - Regency Ultimate U39E Series Owners & Installation Manual

Driftwood Log Set Installation

Read the instructions below carefully and refer to the diagrams. If logs are broken do not use the unit until they are
replaced. Broken logs can interfere with the pilot operation.
The driftwood log kit contains the following:
A Rear Log
B Middle Left Log
C Front Left Log
D
Left Top Log
E
Front Right Log
F Center Log
G Middle Right Log
D
B
C
1. Carefully remove the logs from the box and unwrap them.
The logs are fragile, handle with care - do not force logs
into position.
2. Place Rear Log A on the two pins on the rear log support.
Pins on Rear Log Support
919-939
LOG SET INSTALLATION
A
G
F
E
A
3. Place the Middle Left Log B on the two pins as shown.
4. Place Front Left Log C onto the 2 front pins as shown.
C
5. Place the Left Top Log D on the pin on Log B and on top
of the cut-out on Log A.
D
C
Regency U39E-11 ULTIMATE™ Freestanding Gas Stove
®
installation
B
A
B
Pin
Cutout
10.15.18
| 37