Vertiv Liebert iCOM CMS Installer/User Manual page 4

3.6.4 Importing iCOM CMS Settings
3.6.5 Resetting hardware to factory defaults
3.7 Updating iCOM CMS firmware
3.7.1 Firmware update using USB drive
3.7.2 Firmware update using drag-and-drop
3.8 Managing Access Permission and PINS
3.9 Generating a Diagnostics Report
3.10 Setting unit name, location and serial number
3.11 Setting the iCOM CMS Name
3.12 Setting the Managing Mode
3.13 Managing SSL Certificates
3.13.1 Generating a Certificate Signing Request
3.13.2 Generating a Self-signed Certificate
4 Installing and Connecting iCOM CMS
4.1 Mounting iCOM CMS on Thermal-management Unit
4.2 Connecting the SRC and CMS Control Boards with the Modbus Gateway
4.3 Setting up Communication with the Web-based User Interface
4.4 Set the Managing Mode to SRC
4.5 Enable the Connected SRC Units
4.6 Registering with the Administration Portal to Allow Mobile-app Users Access
4.7 Setting Up Network Communication
4.8 Setting Up BMS serial communication
Appendices
Appendix A: Technical Support and Contacts
Vertiv | Liebert® iCOM CMS™ Intaller/User Guide |
27
27
28
29
29
30
30
31
31
32
32
32
33
35
35
36
39
40
40
41
41
42
43
43
4