Maintenance Scheduling And Component Run Hours; Setting Maintenance Dates; External Monitoring And Building-Management Systems - Vertiv Liebert iCOM CMS Installer/User Manual

3.3 Maintenance scheduling and component run hours

You can view and configure maintenance dates for each unit by clicking the Service button. The left
panel displays each unit, along with the date of its last performed maintenance and next schedule
maintenance.
Clicking a unit displays the last and next maintenance dates in the right panel. You can select and save
the maintenance last and next maintenance dates for the SRC unit. See
page 22.
Service panel fields
Unit
Unit name.
Last PM
Last scheduled maintenance for the unit.
Next PM
Next scheduled maintenance for the unit.

3.3.1 Setting Maintenance Dates

1. On the menu bar, click SERVICE.
The SERVICE panel opens.
2. Select a unit in the SERVICE panel.
3. In the COMPONENTS panel, select a date for the last and/or next scheduled maintenance,
then click Save.
Maintenance-date fields
Last Maintenance
Date of the previous scheduled preventive maintenance for the unit.
Next Maintenance
Date of the next scheduled preventive maintenance for the unit.

3.4 External Monitoring and Building-management systems

NOTE: Some Building Management Systems can be configured to send continuous updates for
setpoints, which often results in setting the same value. To avoid a back-up with iCOM CMS and loss
or write values, configure the BMS to write device configuration no more than once per minute.
22
Setting Maintenance Dates
Vertiv™ | Liebert® iCOM CMS™ Intaller/User Guide
on