AgaMatrix Jazz Wireless 2 Owner's Manual page 53

Error 1:
Problems have occurred that are related to test strip use.
[1] If this message appears the moment the test strip is in-
serted, the test strip may be wet or damaged.
[2] If the message appears during a test, the test strip may
have been removed too early. Retest using a new test strip.
[3] If this message appears after the 1-2-3 countdown instead
of a result, it may indicate that you applied more blood after
testing began.
Error 2:
The meter has detected an irregularity with the sample.
[1] The test strip may be partially filled. Retest using a new
test strip. Ensure that enough blood is applied to the test strip
when retesting.
[2] The sample may not be blood or control solution. Retest
using a new test strip. Ensure that the test site is clean prior to
performing a blood glucose test or that the control solution
bottle tip is wiped clean prior to performing a control solution
test.
Error 3:
The meter has detected that the test strip is in poor condition.
[1] The test strip may have been improperly stored (e.g. hot,
humid conditions) or may be expired. Check the test strip
51