AgaMatrix Jazz Wireless 2 Owner's Manual page 22

Before pairing with an additional supported device, turn off
Bluetooth® on any devices already paired with your meter.
This will ensure connection with your additional supported
device. Then follow the steps for "Pairing for the First Time"
to pair with the new device.
How to Un-pair the App from the Meter
[1] In the App, tap on the Menu icon, then tap on "Meters."
[2] Find the meter you wish to disassociate with your App by
matching the serial number shown in the App to the number
shown on the serial number label. You can find this label
under the meter battery door.
[3] Swipe left on the selected meter. Tap on "forget." The
meter will no longer transfer data to the App.
Automatic Data Transfer (Sync)
The first time your meter pairs with your supported device it
will set the date and time on your meter.
Every time your meter and supported device are within 10
feet of each other, and the meter is turned on, any recent
data will be transferred to the App and the date and time will
be set to match the date and time on your supported device.
Time and Date
The time and date settings on the meter are configured to
match the supported device's time and date settings.
20