AgaMatrix Jazz Wireless 2 Owner's Manual page 20

[2] Navigate to the Menu: Tap on the icon made of three lines.
[3] Tap on "Meters"
[4] Tap "Add a new meter"
[5] On your meter, press and hold the Meter Button.
[6] Tap on your meter's serial number when it appears in the
App. You can find this label under the meter battery door.
[7] Enter the passkey: A 6-digit passkey will appear on the
meter. Type the number into the App.
Example image
of a passkey:
[8] Confirm pairing is successful: Both the meter and the App
will indicate that pairing was successful. The meter will have
a check symbol and the App will show a message.
Example image of
a check symbol:
The meter and the App must be within 10 feet of each other
in order to pair and transfer data.
18