AgaMatrix Jazz Wireless 2 Owner's Manual page 37

test strip port. Make sure you insert the test strip, with the
contact bars facing towards you, into the test strip port. The
meter will turn on.
[3] Meter Ready For Test: The meter now displays the apply
sample to test strip animation, indicating it is now ready for
you to apply blood. You do not need to set a calibration code
for this meter.
[4] Lance the Test Site: Keep your hand warm or gently mas-
sage the site you are lancing to stimulate blood flow.
Press the lancing device against the site to be lanced. Press
the release button.
[5] Obtain a Drop of Blood: Squeeze from the base of your
finger up towards the tip, milking your finger, until a small
Apply Sample to Test Strip Animation:
Release
Button
35