Operation; Function Of Keys - Kipor KP310V1.0 Operation Manual

5. Operation

5.1 Function of keys

Stop／Reset
Manu／ATS
Remote
Control
Start
Parameters Set
Note：
1 when the generator is stopped and in "Manual" Mode, press
the same time, it displays password "Test" mode
password in 60 seconds, the system will automatically exit password menu and enters System
Operation menu.
2 In "Parameters Set" menu, press
backup current system set, and the digital tube displays "Backup" for 2 seconds.
3 When genset is stopped, and in "Manual" Mode, press
restore system set, and the digital tube displays "Reset" for 2 seconds.
4 In the "Oil Filter Running Time" mode, press
Genset is running, press
alarming status, press
In "System Set" mode, press
sub-menu.
Press to set genset in "Manual" Mode.
In "System Set" mode, press
to "-".
Press to set genset in remote control mode.
In "System Set" mode, press
equal to "+".
In ""Manual" Mode, press
Press to enter "Parameters Set" selection menu.
, and
- 3 -
KP310V1.0 Controller Operation Manual
to stop genset, when genset is in
to reset.
to return to the previous
to decrease the data value, equal
to increase the data value,
can start genset.
and
. If user doesn't input the right
for 5 seconds in the same time to
, and
for 5 seconds, it will clear alarm of oil filter
for 5 seconds at
for 5secs to