Remote Operation; Protection - Kipor KP310V1.0 Operation Manual

KP310V1.0 Controller Operation Manual
outputting.
After starting genset, the security delay countdown timer works. During the security delay range,
low oil voltage, high temperature, under speed, under voltage, under frequency and battery
charging fault are allowed. When the configuring output is set as "4-Genset Idle", and starting idle
time isn't 0, the related configuring output relay outputs, the start idle timer counting down, and
generator is in idle mode.
After the starting idle status, the configuring output relay stop working and genset start to work in
rated status.
Press to stop genset.

5.4 Remote Operation

When the KP310V1.0 controller is working, it is initialized to the "Manual" Mode. Press
to login into the remote mode.
Start steps:
Preheat relay output, meanwhile the preheating timer start counting down. If the preheating time is
set as zero, the relay won't output.
After preheating, the preheating relay stop working, the fuel relay and starting relay begin to
output. The maximum starting timer begins to count down. If genset can start successfully during
the countdown, the starting relay stops outputting. If failed, the fuel relay and starting relay stop
outputting.
After starting genset, the security delay countdown timer works. During the security delay range,
low oil voltage, high temperature, under speed, under voltage, under frequency and battery
charging fault are allowed. When the configuring output is set as "4-Generator Idle", and starting
idle time isn't 0, the related configuring output relay outputs, the idle time start counting down,
and generator is in idle mode.
Press remote stop key to stop genset.

6. Protection

KP310V1.0 controller has a lot of protection functions. When genset has some problems, relevant
fault LED alarms. The fault alarm includes three types: warning, delay shutdown, immediately
shutdown.
- 11 -