Bosch Performance Line User Manual page 55

Din en 15194/din en 82079-1
Hide thumbs Also See for Performance Line:
Table of Contents

Advertisement

Error messages
Display
Error source
531
Configuration
540
Overheating of the drive unit
550
USB consumer
580
Software version
591
Authentication
592
Incompatible components
593
Configuration
595, 596
Communication
602
Rechargeable battery or charging
error of the rechargeable battery
603
Rechargeable battery
605
Temperature of the rechargeable
battery or charging error of the
rechargeable battery
606
Rechargeable battery connection
610
Rechargeable battery voltage error
620
Charger
640
Rechargeable battery
Measure
Restart the e-bike.
1) Switch the e-bike off.
2) Let the motor cool off.
3) Select a low riding mode.
Disconnect the external device from the USB port and restart the e-bike.
Restart the e-bike
Switch the e-bike off. Remove the rechargeable battery and insert it again.
Restart the e-bike.
Insert compatible display.
Restart the e-bike.
Check the cable connections and contacts (visual check). Restart the e-bike.
1) Restart the e-bike.
or
1) Disconnect the charger from the rechargeable battery.
2) Restart the e-bike.
3) Connect the charger to the rechargeable battery.
Restart the e-bike.
Let the rechargeable battery reach the operating temperature.
or
Disconnect the charger from the rechargeable battery and let the rechargea-
ble battery and charger reach the operating temperature.
Check the cable connections and contacts.
Restart the e-bike.
Replace the charger. Only use an approved charger.
Restart the e-bike.
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Active line

Table of Contents