Bosch Performance Line User Manual page 25

Operation
• Remove any dirt on the charging slot and the contacts with
a dry cloth.
• Only charge the rechargeable battery under supervision.
1. When the rechargeable battery is inserted: Switch the e-bike
off (see the Chapter "Operation > E-bike > Deactivating the
e-bike").
NOTICE: During the charging process, the e-bike cannot be
switched on when the rechargeable battery is inserted. You
can remove or insert the control computer during the charging
process (see chapter "Operation > Control computer").
When the control computer is inserted, the backlight on the
display panel will be activated at low brightness. "Bicycle is being
charged" will appear in the text display field. The internal re-
chargeable battery of the control computer is charged at the
same time.
1. When the rechargeable battery is removed: Place the
rechargeable battery on a clean, solid and non-flammable
surface.
NOTICE
Risk of damage!
If there is no bar blinking on the charging indicator after
the charger has been connected to an empty recharge-
able battery, the rechargeable battery or the charger is
damaged. If multiple bars blink, a protective function is
engaged (see chapter "Notes > Rechargeable battery
> Protective equipment").
• Disconnect the charger from the rechargeable battery
and the power supply.
• Have your specialist dealer check the rechargeable
battery and charger.
2. Insert the device plug in the mains connector jack of the
charger (see Fig.: B-4).
3. Insert the mains plug of the charger in a socket.
4. Only when the rechargeable battery is inserted: Open the
cover of the charging slot.
5. Insert the charging plug in the charging slot
(see Fig.: B-5 or Fig.: B-6).
The charging process will start. The charging progress is dis-
played on the charging indicator of the rechargeable battery
(see chapter "Charging indicator").
6. Monitor the charging process.
25