Removal Lock; Power Supply - Bosch Performance Line User Manual

Operation

Removal lock

The control computer can be locked in the holder to prevent
removal.
• If you have no experience mounting bicycle components, have
your specialist dealer mount the removal lock.
1. Disconnect the holder from the handlebars.
2. Place the control computer in the holder.
3. Screw the blocking screw (M3 × 8 mm) into the threading of
the holder from below (see Figure. B-8).
4. Mount the holder back on the handlebars.
Fig.: B-8 Example picture of the holder without control computer.

Power supply

When the e-bike is switched on and the rechargeable battery is
charged, the inserted control computer is supplied with energy
via the e-bike rechargeable battery.
The control computer that has been removed is supplied with
power from an internal rechargeable battery.
If the internal rechargeable battery is weak when you activate the
control computer, "Attach to bike" will appear for 3 seconds in
the text display field (see Figure B-9). The control computer will
switch back off afterwards.
• Charge the control computer (see following chapter "Operation
> Control computer > Charging the control computer").
Blocking screw
Fig.: B-9 If the internal rechargeable battery of the control computer
is empty, "Attach to bike" will be displayed during activation.
28