Absolute And Incremental Dimensions For Turning And Milling (G90/G91) - Siemens Sinumerik 840D sl Programming Manual

Program code
N30 G90 X50
See also
Absolute and incremental dimensions for turning and milling (G90/G91) (Page 149)
9.3.3

Absolute and incremental dimensions for turning and milling (G90/G91)

The two following figures illustrate the programming with absolute dimensions (G90) or
incremental dimensions (G91) using turning and milling technology examples.
Milling:
Fundamentals
Programming Manual, 01/2015, 6FC5398-1BP40-5BA2
Comment
; Absolute dimensions active, traverse to position X75 (the
zero offset is traversed).
Geometry settings
9.3 Dimensions
149