Siemens Sinumerik 840D sl Programming Manual page 4

Preface
SINUMERIK
You can find information on SINUMERIK under the following link:
www.siemens.com/sinumerik
Target group
This publication is intended for:
● Programmers
● Project engineers
Benefits
With the programming manual, the target group can develop, write, test, and debug programs
and software user interfaces.
Standard scope
This Programming Manual describes the functionality of the standard scope. Extensions or
changes made by the machine tool manufacturer are documented by the machine tool
manufacturer.
Other functions not described in this documentation might be executable in the control. This
does not, however, represent an obligation to supply such functions with a new control or when
servicing.
Furthermore, for the sake of clarity, this documentation does not contain all detailed information
about all product types and cannot cover every conceivable case of installation, operation or
maintenance.
Technical Support
You will find telephone numbers for other countries for technical support in the Internet under
http://www.siemens.com/automation/service&support
4
Programming Manual, 01/2015, 6FC5398-1BP40-5BA2
Fundamentals