Siemens Sinumerik 840D sl Programming Manual page 206

Motion commands
10.9 Contour definitions
The end point of the straight line is defined by the following specifications:
● Angle ANG
● One Cartesian end point coordinate (X2 or Z2)
ANG:
X1, Z1:
X2, Z2:
Syntax
X... ANG=...
Z... ANG=...
Meaning
X... :
Z... :
ANG:
Example
Program code
N10 X5 Z70 F1000 G18
N20 X88.8 ANG=110
N30 ...
206
Angle of the straight line
Start coordinates
End point coordinates of the straight line
End point coordinate in the X direction
End point coordinate in the Z direction
Identifier for angle programming
The specified value (angle) refers to the abscissa of the active working plane (Z axis with
G18).
Comment
; Approach the starting position
; Straight line with angle specification
Programming Manual, 01/2015, 6FC5398-1BP40-5BA2
Fundamentals