Emerson Rosemount BINOS 100 F Instruction Manual page 6

Addendum for pressurized analyzers intended to be used in hazardous areas: zone 1: all versions, zone 2: non-flammable gases only
Hide thumbs Also See for Rosemount BINOS 100 F:
Table of Contents

Advertisement

MLT 2 / BINOS
Products described in this manual shall not be supplied with explosive
gases!
Instruments inclusive EEx p unit may weigh up to 40 kg (depending on
installed options)!
Do not use the attached EEx p unit or the external valve as a handle for
transportation or lifting the instrument! Failure to follow may loosen or
damage the devices and impair the safety of the whole instrument!
When the analyzer is out of order or if the pressurization unit shuts off all
non-intrinsically safe inputs and outputs connected to external equipment
MUST be shut off too!
This ensures that no hazardous voltages are present within the analyzer
enclosure when not pressurized.
To avoid loss of life, personal injury and damage to this equipment and on-site property,
do not operate or service this instrument before reading and understanding this
instruction manual and receiving appropriate training.
SAVE THESE INSTRUCTIONS FOR FUTURE USE.
P - 4
®
100 F
Safety Instructions
EXPLOSION HAZARD !
EXPLOSION HAZARD !
EXPLOSION HAZARD !
AUTHORIZED PERSONNEL
ATEX Instruction Manual
Emerson Process Management Manufacturing GmbH & Co. OHG
ETC01035
August 2005

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rosemount mlt 2

Table of Contents