Auto External Static Pressure Setting Operation - Panasonic U-8ME1E81 Service Manual

3. Detailed Settings Function

Auto External Static Pressure Setting Operation

6. Keep pressing the
simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the LCD
display.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel.
7. Press the
If you wish to see the next screen instantly, press the
or
Select "4. Test run" on the LCD display and press the
button.
Maintenance func
1
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel.
The "Test run" screen appears on the LCD display.
2
Test run
Change
3
Change the display from OFF to ON by pressing the
or
Test run
4
Change
The "Maintenance func" screen appears on the LCD
5
display.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
6
Sel.
8. Press the
on the LCD display.
7
TEST
[ ]
8
, and
20:30 (THU)
Page [ ] Confirm
or button to see each menu.
button.
20:30 (THU)
Page [ ] Confirm
20:30 (THU)
Test run
OFF
[ ] Confirm
button. Then press the
20:30 (THU)
Test run
ON
[ ] Confirm
20:30 (THU)
Page [ ] Confirm
button. "TEST" will be displayed
20:30 (THU)
START
9. Press the
Test run setting mode screen appears on the LCD display.
buttons
10. Set the operation mode to "
" " by pressing the
or button. Then press the
The fan motor will be activated, the auto external static
pressure setting operation and setting-check operation
will be performed for about 3 to 30 minutes.
The fan speed will change automatically while these
operations are in progress. When these operations
completed, "TEST" will be disappeared from the LCD
display.
NOTE:
button.
The auto external static pressure setting operation and
setting-check operation will not be performed unless
" (MODE FAN)" and "
been selected.
11. Press the
The LCD display will be returned to the initial screen.
NOTE:
Failure to set this parameter may result in decreased
airflow and condensation.
2-20
Remote Controller Functions
button. Test run will be started.
20:30 (THU)
TEST
MODE
FAN SPEED
COOL
FLAP
" and fan speed mode to
or
20:30 (THU)
TEST
FAN SPEED
MODE
FAN
FLAP
20:30 (THU)
FAN SPEED
MODE
FAN
FLAP
(FAN SPEED)" have
button.
20:30 (THU)
[ ] START
2WAY SYSTEM
button or
button.