Test Run Function - Panasonic U-8ME1E81 Service Manual

3. Remote Controller Servicing Functions
4. Remote Controller Servicing Functions

Test Run Function

Operates the unit with the thermostat forced ON.
<Procedure of CZ-RTC2>
Press and hold the
1
longer.
2 "TEST" appears on the remote controller LCD
display (Fig. 2-9).
3 Start operation.
4 Press the
controller display.
1
<Procedure of CZ-RTC3>
1 Keep pressing the
buttons simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the
2
LCD display.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
3
Sel.
2 Press the
menu.
If you wish to see the next screen instantly, press
4
the or
Select "4. Test run" on the LCD display and press
the button.
5
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel.
6
Change the display from OFF to ON by pressing
the or
button.
Test run
7
Change
8
button for 4 seconds or
button to return to normal remote
, and
20:30 (THU)
Page [ ] Confirm
or button to see each
button.
20:30 (THU)
Page [ ] Confirm
button. Then press the
20:30 (THU)
Test run
ON
[ ] Confirm
1 4
[ ]
START
3 Press the
on the LCD display.
TEST
[ ] START
4 Press the
Test run setting mode screen appears on the LCD
display.
TEST
MODE
COOL
2-24
2WAY SYSTEM
Remote Controller Functions 2WAY SYSTEM
Remote Controller Functions
CZ-RTC2
Fig. 2-9
20:30 (THU)
CZ-RTC3
Fig. 2-10
button. "TEST" will be displayed
20:30 (THU)
button. Test run will be started.
20:30 (THU)
FAN SPEED
FLAP
2
3