Display Of "Maintenance Function" Screen - Panasonic U-8ME1E81 Service Manual

4. Remote Controller Servicing Functions
4. Remote Controller Servicing Functions
<Function of CZ-RTC3>

Display of "maintenance function" screen

1 Keep pressing the
buttons simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the
LCD display.
2 Press the or
menu.
If you wish to see the next screen instantly, press
the or button.
List of Servicing Functions
Functions
Operation with forced
Test run
thermostat ON
Sensor temperature Temperature display from
display each sensor
Servicing check
Alarm history display
display
Filter lifetime, operating
Simple settings mode priority, central control
address, and other settings
System address, indoor
Detailed settings unit address, central control
address, and other settings
Automatic address setting
Automatic address based on command from the
wired remote controller
, and
button to see each
Description Menu selection
4. Test run
5. Sensor info
6. Service check
7. Simple settings
8. Detailed settings
9. Auto address
2-23
Remote Controller Functions
Remote Controller Functions
Maintenance func 20:30 (THU)
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel. Page [ ] Confirm
Reset operation Unit status
Press the
button.
When settings are
made from a remote
Press the
controller, the indoor
button.
unit where that
(Restart)
remote controller is
connected stops.
Automatic reset Entire system stops.
2WAY SYSTEM
2WAY SYSTEM
1
2
3
4
5
6
7
8