Dimension Drawings - Siemens SIMATIC Ident System Manual

Note
• Regeneration time for the MDS D160 between wash cycles must be at least 24 hours
• It is recommended that a test is performed in critical applications.
7.7.5

Dimension drawings

Dimensional drawing of MDS D160
Dimensions in mm
Figure 7-16
Dimensional drawing of spacer
Dimensions in mm
Figure 7-17
SIMATIC RF200
System Manual, 09/2013, J31069-D0227-U001-A8-7618
Dimensional drawing of MDS D160
Dimensional drawing of spacer
Transponder
7.7 MDS D160
185